Not sure which hearth is right for your wood heater?
Let our Hearth Finder guide you.

Our smart lookup tool instantly matches Australian wood heater models with the hearth solutions we offer.
If you can’t find your model or need expert guidance, simply contact us and our team will be happy to help.

Did you know?

A wall mounted heat shield can reduce the clearance of your heater? Try adding a heat shield in the calculator below – see the corner clearance reduce on a corner installation by adding a heat shield at 12mm or 25mm spaced off the wall Refer to AS/NZS 2918 for the specific installation instructions.

01

Appliance Selection

Select your manufacturer and model to retrieve factory specifications.



02

Installation Profile

Configure your heater layout pattern.


03 Dimensional Overrides (Optional Tweaks including adding a heat shield to reduce clearances)
▼
03

Dimensional Overrides

Tweak values in millimeters (mm) to adjust for your custom hearth zone.


04

Vector Layout Engine

Interactive scale blueprint map displaying layout floor projections.

Appliance Frame
Footprint Projection
Ref Overlay Shield
Perimeter Wall


Retrieved Structural Specs
▼
Height
—
Max Output
—
Flue Size
—
Min Protector Thick
—

Manufacturer Layout Directives:

No appliance selected.

05

Compliance Evaluation

Real-time dynamic calculations based on guidelines.

Clearance Factor Applied
200 mm
Wall Corner to Flat Front Edge
1331 mm
Required Width Along Walls
1224 mm
1250mm Pad Status:

Tailored Solutions Match Matrix

The following signature 20mm granite profiles fulfill your retrieved clearance dimensions exactly:


Disclaimer: All minimum hearth dimensions provided by this tool are for general reference and preliminary planning purposes only. Hearth requirements can vary based on specific appliance models and floor compositions. It is the sole responsibility of the seller and the installer to ensure that the final installation strictly complies with AS/NZS 2918 and the manufacturer’s specifications. Haus O’ Fire accepts no liability for installations that do not meet these regulatory standards.